45
4.4 Schedule
Figure 4-11
After system booted up, it is in default 24-hour regular mode. You can set record type and
time in schedule interface.
4.4.
1 Schedule Menu
In the main menu, from setting to schedule, you can go to schedule menu. See Figure 4-12.
Channel: Please select the channel number first. You can select
“
all
”
if you want to set for
the whole channels.
Week day: There are eight options: ranges from Saturday to Sunday and all.
Pre-record: System can pre-record the video before the event occurs into the file. The value
ranges from 1 to 30 seconds depending on the bit stream.
Redundancy: System supports redundancy backup function. It allows you backup recorded
file in two disks. You can highlight Redundancy button to activate this function. Please note,
before enable this function, please set at least one HDD as redundant.(Main menu-
>Advanced->HDD Management) Please refer to chapter 4.4.1.2 for detail information.
Snapshot: You can enable this function to snapshoot image when alarm occurs.
Record types: There are three types: regular, motion detection (MD) and Alarm.
Please highlight icon
to select the corresponding function. After completing all the setups
please click save button, system goes back to the previous menu.
At the bottom of the menu, there are color bars for your reference. Green color stands for
regular recording, yellow color stands for motion detection and red color stands for alarm
recording.
Figure 4-12
