XtendLan DVR-1670B User Manual Download Page 5

Page: 5 / 107

User Manual of DVR-1670B

Page 5

Preview and playback

Support analog moniotor and VGA output.

Support multiple preview modes.

Support sensitive area mask.

Support camera spiteful block alarm.

Support one channel play back by files or by time.

Display local record status.

PTZ

Support many kinds of PTZ protocol.

Support preset, sequence and cruise.

Alarms

Support exception alarm, motion detection alarm, external alarm, etc.

Others

Support IR control.

Support multi-level user management.

Network

Support TCP, UDP, RTP, Multicast for network preview.

Support PPPoE for board band dialup.

Support PSTN for narrow band dialup.

Support remote parameters setup.

Alarm information can be sent to remote center.

Network control PTZ.

Network record live stream.

Network download and playback the recorded files in DVR.

Remote upgrade the firmware.

RS-232 supports transparent channel function so that the remote PC can use DVR to

control serial devices.

Support IE to preview and config DVR.

Support log.

Development support

Provide network SDK.

Provide client demo source code.

Summary of Contents for DVR-1670B












































































































Search results

Summary of Contents for DVR-1670B

Reviews:

Related manuals for DVR-1670B

Brands by name

Popular brands

XtendLan DVR-1670B, User Manual

Search results

Summary of Contents for DVR-1670B

Reviews:

Related manuals for DVR-1670B

Brands by name

Popular brands