- 2 -
3. System Connection
JS/AP
JS/VP
CN101
JS-OS2
JS-OS1
AC ~
White
Red
Yellow
Black
shielded layer
1R 2W 3Y 4B
JS_VP
LB
3 2 1
1R 2W 3Y 4B DC- DC+
4B 2W +12
1R 2W 3Y 4B
1R 2W 3Y 4B
Note 1
Note 4
Note 2
Note 3
●
1R
Power positive. +12V present when Door Station calling or being monitored
●
2W
Power negative (GND)
●
3Y
Image signal (Video signal)
●
4B
Talk and control signal (Audio signal)
Terminal●Discriptions:
It’s recommended to use RVVP 4x0.3mm2 Shielded Cable. And when distance is over 30m, we
suggest to use additional co-axle cable SYV- 75-3 (RG-59) connect 3Y and 2W pin.
●
Note 1:
Plug the AC Adaptor in to the AC power terminal ensuring it is well seated.
●
Note 2:
If you want to use multiple monitors:
For a single Monitor system, keep the
jumper (which is already on JP-VD ). If you are setting up a multi-Monitor system, remove all JP-
VD jumpers EXCEPT the last Monitor. NB If you are setting up monitors PARALLEL rather than
chained, the ‘last’ monitor is the one physically furthest away from the door station.
●
Note 3:
JP-LK is used to enable the electric Lock function. Remove the jumper if you are going to
use the Monitor power to supply power to the Lock. Refer to the Doorbell camera manual.
●
Note 4:
LB port is for Lock connection, refer to Door Camera manual.
