2.
Operation Instructions
■
Operation for Basic Video Doorphone
1)
When visitor presses the Call Button on the Outdoor Station, the Monitor rings, at
the same time, the screen displays the visitor image.
2)
When press TALK Button, you can talk with the visitors for 90 seconds; During the
talk state, press TALK again to end. If nobody answers the phone, the screen will
turn off after 30 seconds automatically. If the system connects two or more Monitors,
and when the TALK Button is pressed in one Monitor, the other Monitors will
automatically shut off.
3)
When the Monitor is in standby, press Monitor Button, the screen will display the
view of the Door Station; press TALK Button you can speak to the Door Station; if
wait 30 seconds or press Monitor Button again, the screen turns off.
4)
Press Unlock Button to release the Electronic Latch during monitoring or talking.
5)
Adjust the two image adjustment potentiometers to change contrast and brightness.
6)
Adjust the volume potentiometer on the back of the monitor to change volume level.
■
Selection of Chord Melody
1)
When Monitor is standby, press CHORD Select Button and hold 2 seconds, until it
enters Chord melody selection state and plays current melody.
2)
Press CHORD Select Button again to select preferred chord melody sequentially,
one more time Chord Select Button is pressed, next melody is switched and played.
3)
Press any other button to confirm melody selection; if wait 30s and no Button
pressed, Monitor will exit Chord melody selection state.
■
Operation for Intercom
1)
When system is connected with multi Monitors, intercom is available.
2)
Intercom calling can be initiated by any Monitor. Press INTERCOM button, LED
will be lighten, and the other Monitors will ring. If TALK Button is pressed on the
called Monitor, the intercom talking is connected.
3)
If INTERCOM Button is pressed, and no Monitor answers, you can press the TALK
Button to cancel or it will exit automatically after 30 seconds.
4)
Intercom function is prior to monitor function, but calling function is always the
first.
DPK-242 User's manual
www.xtendlan.com
4
