REV.12-D 202002 | Copyright © 2020 by Core Distribution, Inc. | COVERED BY ONE OR MORE PATENTS | All Rights Reserved | Page
8
MAINTENANCE TIPS
WET LADDER
If the ladder is wet or if there is water on the ladder, open the ladder to the maximum and, with a dry cloth, absorb the water. It is
recommended to let the ladder dry fully opened, on one side and then on the other, with the ladder leaning against a wall.
OXIDISED LADDER
If the ladder is oxidised (due to previous poor drying), there will be white residue on the stiles. First, remove the spots with a dry cloth.
Then, to ensure the ladder deploys and retracts correctly, use a silicone based spray or a non-petroleum based furniture polish wipe
once the ladder is fully opened and dry it correctly. Wait a few minutes and close the ladder. Never use a petroleum based product- it
will damage the internal mechanism of your ladder.
PAINT OR OTHER SUBSTANCES STICKING TO STILES
If paint residues were left on the ladder, they must be removed using a sponge. Do not use steel wool since it might damage the
opening/closing mechanism. After all residues have been removed from the stiles, apply a silicone based spray or a non-
petroleum based furniture polish wipe as indicated in above section “Oxidised Ladder.’’
HARD TO MOVE LATCHES
If the latches are hard to push, use a compressor or compressed air duster to properly clean the latches. Then perform maintainence
on the latches (with a silicone based spray or a non-petroleum based furniture polish wipe) with a forward/backward movement. Dry
excess spray with a dry cloth.
ENGLISH
DRY
CLEAN
CLEAN
CLEAN
LET DRY
MAINTAIN
MAINTAIN
EXTEND
TURN
STEEL WOOL
DRY
MAINTAIN
PETROLEUM
