Xtech FIERCE Instruction Manual Download Page 5

7. When pairing is successful, another tone will be heard through the speaker 

and the word "bLUE" will stop blinking (solid state). If after 60 seconds the 

pairing process fails, please repeat steps 1 through 6 described above. 

8. You can now start streaming audio through the speaker wirelessly from 

your favorite Bluetooth

®

- enabled devices.  

9. The speaker will re-pair automatically with memorized devices after being 

turn off and on again.

Type

Maximum power output (RMS)

DC input

6.5in party loudspeaker system

Bluetooth

®

 compatible

50W

5V/1A

Device

Driver unit

Frequency

Impedance

Sensitivity

Signal to noise ratio

Satellite speakers: 2x6.5in

20Hz-100Hz

6.5in@3Ω

83dB±3db

≥70dB

Directivity

Frequency

Impedance

Sensitivity

Omnidirectional

50HZ-13KHZ±3db

600Ω

12db(-95dbm)

Connection type

Memory card slot

Wireless RF frequency

Wireless range

USB, SD™ (TF), Bluetooth

®

 (wireless), Aux (wired)

and one ¼in jack for microphone

USB, MicroSD™ (TF card)

2.4GHz-2.480GHz

10m

Speaker

Microphone

Connectivity

Type

Charging time

Runtime 

Charging method

3.7V 2000mAh, lithium ion cell

5 hours

Up to 8 hours at 50% capacity*

Micro USB 5V/1A

Battery

LED lighting effects 

Dimensions (LxWxH)

Weight

Color 

Cable length

Warranty

Yes

9x8.2x20.4in

6lb

Black

4ft

1 year

Additional information

Technical specifications

*Playback time may vary depending on each individual’s playlist, usage and settings

Precautions

• Do NOT use this unit for anything other than its intended use. 

• Do NOT expose the speaker to excessive heat or to direct sunlight for     

  long periods of time.

• Do NOT expose the speaker to rain or water, and avoid environments     

   with high humidity or dust. 

• Do NOT disassemble, repair or modify the speaker yourself. 

• Do NOT use cleaning products that contain benzene, solvents or alcohol.

• Do NOT use near a microwave oven or wireless LAN products. 

• Do NOT place containers with liquid on top or near the speaker.

• Do NOT place objects which are sources of heat on the speaker cabinet  

  such as lighting equipment or smoke machines 

• Do NOT stack the speaker cabinet in a manner that could cause injury     

  should a cabinet become dislodged.

FCC statement

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to part 15 of the FCC rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures: 

• Reorient or relocate the receiving antenna. 

• Increase the separation between the equipment and receiver. 

• Connect the equipment into an outlet on a circuit different from that to      

   which the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help. 

Summary of Contents for FIERCE












Reviews: