19
Antenna Setup-3) USALS
USER INSTALLATION
* The default value is “OFF”.
* Precondition for using USALS
function.
-> Check if the position of the antenna
motor is on “0” degree.
-> Now the maximum limit of the
antenna is 1 meter.
When you choose the satellite of which
you want to use the USALS function,
its direction and longitude will be
displayed.
Input Your Longitude and Your
Latitude.
(Please refer to the manual attached to
the USALS Motor.)
It will search for “Satellite Location”
and automatically go to the Channel
Search screen.
1)Antenna
: You can select maximum 16
antennas with the combination switches.
2) Satellite
: Select your preferable satellite
3) LNB1, 2
: Enter the proper LNB frequency referring to your
LNB using numeric key on the RCU or use KEY
PAD displayed by pressing OK key.
If you have a dual LNB, enter the proper value in
the both of value box.
the proper value in the both of value box.
4) Switches (0/12 Volt, 22KHz Tone, DiSEqC)
: You can select the switches with which you want
to configure the antenna.
5) C/Ku band control
: You can select C/Ku band
control by switches types.
After setting all necessaries, please press
“Go to Sat Position”
to finish USALS antenna setup
menu and move to channel search page.