XTBA SMART SPLITTER Manual Page
3
of
3
Product #01501 - Issue C 11/07/2011
© XTBA 1986 – 2012
POWER SUPPLY
The mains input to the transformer is via a 2A a/s fuse and the transformer
may be strapped to 120 volt operation via on board links. A spare fuse is
provided in the input connector block on the rack unit.
19” RACK MOUNTING
The rack version of the XTBA Smart Splitter is provided with a pair of ‘ears’
for fitting into a 19” rack frame. The ears are fitted to the unit by removing the
two screws on either side at the front of the unit. The stick on rubber feet
(used when the unit is free standing) will need to be removed from the
underside of the unit.
Technical Specifications 19” Rack Front or Rear connectors
Dimensions
230/270mm inc.front handles x 430mm x 40mm
Weight
4.0 Kg
Power
190/250V AC Nominal 2A 240V AC
Data
DMX512 1986/1990
Pin Configuration
Pin 1 Common, Pin 2 minus data, Pin 3 plus data.
Pins 4 and 5 are not connected on the buffered outputs,
but are looped through on data input to data through.
General Information
This product may only be used for controlling dimmers and moving
lights. It must not be used in DMX512 applications for stage machinery
or pyrotechnics. Using the product out of these specifications will
remove all responsibility from the supplier.
CE Declaration of conformity
XTBA declares that the following equipment meets the requirements of the
EMC Directive 89/366/EEC.
WEE/FC2753ZS
