The 1001dx is a one channel (mono) bass amplifier designed
to provide high power, exceptional flexibility and outstand-
ing performance in an all-in-one package. It can be utilized to
operate a complex woofer system or, with its on-board crossover,
be easily integrated into a multi-amp mobile audio system.
The internal crossover’s RCA line outputs can be utilized to feed High Pass
frequencies to additional amplifiers, thus, eliminating the need for external,
active crossover components. As with all Xtant amplifiers, the 1001dx incor-
porates a forced convection thermal management system and a Pulse Width
Modulated power supply for high efficiency and unsurpassed reliability and
on-board accesssory ports which allow performance upgrades via Xtant’s
plug-in modules. All these features are encased in Xtant’s exclusive finish of
stainless steel and copper!
Standard Features
Forced Convection Cooling:
All Xtant amplifiers
employ forced convection cooling for thermal management.
An on-board thermal sensing circuit regulates fan speed to
maintain optimum operating temperature.
PWM Power Supply:
All Xtant amplifiers feature a fully
regulated, Pulse Width Modulated power supply. This supply
technology provides high efficiency and consistent output per-
formance even when battery voltage is less than optimum.
Crossover:
A 12/24 dB per octave “Butterworth” filter network is stan-
dard on the 1001dx amplifier. Both Low Pass and High Pass frequency selec-
tion is via a 12 pin Frequency Module (SIP). The amplifier is shipped with
90 Hz SIPs installed, 12 other frequencies are available from your Xtant
Dealer. The crossover’s Low Pass function is dedicated to the 1001dx while
the High Pass or Bypass functions are available at the RCA line outputs.
Balanced / Floating Input:
All “c”, “x” and “d” Series amplifiers
offer docking ports which accept the optional Balanced Line Module (BLM-
1). When added to the input stage, this circuitry helps to eliminate “system
noise” associated with “ground-loops” and increases input sensitivity. f
Modular Expansion Port:
All Xtant amplifiers are supplied with a
modular port(s) used for docking any of Xtant’s signal processing modules.
Protection Circuitry:
Both Thermal, Overcurrent and Low Voltage
protection are incorporated into the 1001dx. In the event of a problem, the
amplifier will reduce its power to maintain operation. In the case of Low
Voltage, the amplifier will shut off when the battery voltage falls to 10 Volts
or less.
Status LEDs:
Four LEDs, visible through the cover, indicate operational
status of all Xtant amplifiers. The red LED illuminates when the amplifier is
“ON”, the blue LED indicates when the low voltage protection has engaged,
the yellow LED indicates that overcurrent protection is employed and the
orange LED indicates that the thermal protection circuit is operational.
5
Summary of Contents for 1001DX
Page 1: ......
