7
Version 1.3
Device Configuration using PC
a.
A RS-232 to USB TTL converter cable is required to connect a XT-63XX device to a computer for
local configuration. Serial Port # 2 is used for configuration. Connect the XT63XX Tx wire to the
TTL converter cable Rx wire. Connect the XT-63XX Rx wire to the TTL converter cable Tx wire.
Connect the XT-63XX ground wire to the ground wire of the TTL converter cable. Use a terminal
application to connect to the COM port associated with the TTL converter cable. Use the
following settings:
A.
Terminal Application Settings:
a.
Bits per second: 115200
b.
Data bits: 8
c.
Parity: None
d.
Stop bits: 1
e.
Flow control: None
B.
Load Script File with the following command
a.
:grscr x 2 "D_Script3_20.bin>"
b.
Upload file with terminal program
C.
Load Parameter File with the following command
a.
:gycfg x 2 "Name of file"
b.
Upload file with terminal program
D.
Save the configuration
a.
:vycfg
