30
7. Adjust the climbing arm,
secure that one side of the
arm wheels do not touch the
ground and the other side
wheels are above the stair.
as shown position in the
picture.
8.Adjust the operating angle
of the machine and hold
the operating switch button
to climbing upstairs. The
switch is a normally open
button, so climber will stop
working the moment
releasing the button.
9. The climbing arms lift the
machine and climbing one
stair. throughout the entire
process, it’s no need to pull
the climber. Just keep
balance and resist the lifting
reaction.
10. Pull the stair climber to
next step, then repeat the
climbing action. Operator
should hold the climber
handrails during this
process.
