Xstatic X-240BAR RGB, User Manual

Page: 14 / 16

14
BLACK OUT All LEDs to On or Off state
AUTO Auto/Demo Mode
SOUND Sound Reactive Settings
STROBE Flash On/Off and Freq. Settings
SPEED Rate at which Colors Change
SENSITITY Level of Sound Reactivity
% Used for the Dimming Percentage
MANUAL Sets Manual Color Mode
FADE | SNAP Fades to Next Color, or Black
+ / -
Increase or Decrease Selection
As described earlier in this manual, AUTO and SOUND modes are selected
and then navigated with the + or - buttons to make program selection.
Selecting
STROBE, SPEED,
or
SENSITIVITY
while the light is in AUTO or
SOUND Modes will adjust those settings under the currently chosen Preset
Program.
The
%
button is used to set the dimming level of the selected color, usually
used with a MANUAL button sequence.
Pressing the MANUAL button and a sequence of numbers will select various
settings. These are described on the next page.
FADE/SNAP allows the user to force a color change, but as a fade effect.
IR REMOTE CONTROL:
9. INFRARED REMOTE OPTIONS
Your fixture comes with an Infrared Remote Control. This requires aim -
ing the remote forward and at the face of the light in order to send it your
selections.
The remote has two sections of control, settings and colors. Each has
the associated selection the light will enter upon pressing. They are
described here: