5.1 - Frequently Asked Questions
Most questions can be answered by throughly reading this manual. If your question can not be answered by
the suggestions below or the installation guide please contact
Question
Answer
I have bubbles in the water, how do I get rid
of this.
The bubbles in the water will usual leave the system
within 24hours.
Shutting down and leaving the the bubbles to settle
before restarting can help.
My pump is making a noise
Check your water level. If the water level drops air will get
into the pump.
It is normal for some noise upon startup but this will fade
quickly.
My CPU temperature seems high what
could be wrong ?
1. Check the pump is running.
2. Make sure the airflow to the radiator is not restricted.
3. Double check all of the air has been removed from the
radiator.
4. Inspect the tubing for kinks and twist which may
restrict flow.
5. Remove the CPU waterblock, re apply thermal paste
and re-mount the block.
Can I use tap water to fill the system?
No tap water can contain impurities which may cause a
build up inside the components.
You are advised to use de-ionized water mixed the
provided additive
Where can I buy de-ionized water
Most supermakets and car maintanace shops will sell it.
It is commonly used for filling Irons and topping up car
batteries.
Water is leaking from the connectors
This is caused by incorrect installation. Drain the system
and reconnect the tubing.
Water is leaking from the radiator, CPU
block or pump.
In the highly unlikely event of a leak from one of the
components drain the system and contact your retailer.
Page 11/12
