Hold FS D and turn on the power.
5. USE The JIMI HENDRIX PACK Including TOGGLE THE J.H. Legendary Wah
First, Upgrade to Spk V1.3 firmware or above.
Since Spark 40 Amp needs to obtain the purchase verification of the paid package from the
Spark App, every time Spark Amp restarts, you need to connect to the App once to activate
the Jimi Hendrix Pack. Then disconnect the tone control connection of Spark App and Spark
Amp to use AIRSTEP with Spark Amp. Please note that this step is only for Jimi Hendrix
Pack.
For J.H. Legendary Wah. Long-press the “DRIVE” button will toggle the Wah pedal.
6. USE AIRSTEP Spk Edition and the Spark App At The Same Time(iOS Only)
After the V1.3 or above firmware update of AIRSTEP Spk Edition, you can use the Spark
App to control the Amp tone when AIRSTEP is connected to the Amp. This update is only
available for the iOS Spark App, Android will be available next time.
Steps
1.
Update your AIRSTEP Spk Edition to V1.3 firmware or above: Firmware Update .
2.
Make sure the footswitch is connected to the Amp first (Before connecting to the
Spark App).
3.
Then click the connect button of the Spark App (After the footswitch is connected).
Please note that you have to make sure the footswitch is connected to the Spark Amp first if
you want to use them simultaneously.
Limitations of this feature
The following shortcomings currently exist, they will be improved in the next update.
1.
Only available on iOS Spark App, Android will be the next time.
2.
The display of pedal toggle state in AIRSTEP and App will not be synchronized, The
Amp and anything else are not affected. If you want to synchronize them, press the
Func button.
Firmware Update
Download the AIRSTEP Updater.
