18
Document MT1602P.A
© Xsens Technologies B.V.
MTi-600 series DK User Manual
5
Standalone Configuration
The MTi-600 DEV includes a UART to USB breakout board that can be used for a minimalistic
connection to a host through the supplied ribbon cable. This board can be separated from the main MTi-
600 DEV board by breaking it off gently. With this board the MTi-600 can be mounted up-side-down,
with the connector facing up, onto any surface by using the mounting holes of the MTi-600. The location
of the MTi-600 mounting holes can be found in the
MTi 600-series Datasheet
6
or
MTi 600-series
Hardware Integration Manual
The UART to USB breakout board uses the 5V power supply of the USB to power the MTi-600 and the
UART pins of the MTi-600 for communication.
5.1 UART to USB board drawing
Figure 11 shows the dimensions of the UART to USB breakout board together with its mounting holes.
Figure 11: UART to USB converter.
6
Links to the latest available documentation can be found via the following link:
