XROCKER BATTLE DEN GAMING BUNK BED, Manual

Page: 3 / 22

JR
Important - Please read these instructions fully before starting assembly
Safety and Care Advice
3
DO NOT REMOVE THE LABEL FROM THE BED
a)
WARNING "High beds and the upper bed of bunk beds not suitable for children under six years
due to the risk of injury from falls":
b)
WARNING "Bunk beds and high beds can present a serious risk of injury from strangulation if not
used correctly. Never attach or hang items to any part of the bunk bed that are not designed to be
used with the bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags"
c)
WARNING Children can become trapped between the bed and the wall, a roof pitch, the ceiling,
adjoining pieces of furniture (e.g. cupboards) and the like. To avoid risk of serious injury the distance
between the top safety barrier and the adjoining structure shall not exceed 75 mm or shall be
more than 230 mm ;
d)
WARNING Do not use the bunk bed/high bed if any structural part is broken or missing;
e) Always follow the manufacturer's instructions;
f) The recommended size of the mattress to be used with the bed is 1900mm x 900mm,
Maximum mattress thickness:160mm;
g) Bed must be aired to maintain a low humidity and to stop moisture in its surroundings.
h) This complies with the requirements of the European Safety Standard BS EN 747-1 & -2: 2012 +A1:2015.
i) Do not allow more than 1 person on the upper bunk at one time.
j)This product is not suitable for children under 6 years.
WARNING
THE MATTRESS SURFACE LEVEL SHOULD
NOT BE ABOVE THIS LINE
Important: Please note the maximun mattress height is
indicated on the vertical bar on the left hand side of
the opening at the top of the ladder.
This is legal requirement and it is vital that the
mattress do not exceed this mark.
Note: The maximum thickness of the
mattress is 160 mm.
This bunk bed conforms to BS EN 747-1 & -2: 2012 +A1:2015
160MM