Xray XII, Instruction Manual

Page: 25 / 28

25
7. 8.
Adjust the gear mesh
so there is appropriate
space between the
spur gear and pinion
teeth. There should be
a very small amount of
freeplay.
The chassis is balanced for use with
a brushless motor. When a standard
brushed motor is used, we recommend
using additional shim(s) between the
motor and the bulkhead to balance the
weight properly.
Double-sided tape
(Not included)
After inserting the antenna rod, fully tighten both
setscrews. Do not overtighten or you may strip the plastic.
Receiver
(Not included)
Receiver wire
Pinion
(Not included)
Motor
(Not included)
Speed controller
(Not included)
➊
➋
➌
PINION GEARS ALU HARDCOATED
#305968 18T / 64P (option)
#305969 19T / 64P (option)
#305970 20T / 64P (option)
#305971 21T / 64P (option)
#305972 22T / 64P (option)
#305973 23T / 64P (option)
#305974 24T / 64P (option)
#305975 25T / 64P (option)
#305976 26T / 64P (option)
#305977 27T / 64P (option)
#305978 28T / 64P (option)
#305979 29T / 64P (option)
#305980 30T / 64P (option)
#305981 31T / 64P (option)
#305982 32T / 64P (option)
#305983 33T / 64P (option)
#305984 34T / 64P (option)
#305985 35T / 64P (option)
#305986 36T / 64P (option)
#305987 37T / 64P (option)
#305988 38T / 64P (option)
GEAR RATIO
902308
SH M 3x8