Xray T4'21 Instruction Manual Download

Page: 35 / 48

SHOCK SHIMMING

TUTORIAL

VIDEO TECH TIP

▶

981212

P 2x12

902312

SH M3x12

902308

SH M3x8

306219

SHIM 3x6x2

306219

SHIM 3x6x1

L=R

7. FRONT & REAR ASSEMBLY

#301351-O

ALU ADJUSTABLE BODY POST STOP (2)

Very handy, easily externally adjustable body post made from

Swiss 7075 T6 aluminum. Allows for adjustment of body height

by 3mm without needing to change the position on the body post.

FRONTWARD

REARWARD

CENTER

(INITIAL SETTING)

BODY POST POSITION

REAR BODY MOUNT SET

#301336

0mm

INCLUDED

#1mm OPTION
#2mm OPTION

INITIAL SETTING

DETAIL

REAR SHOCK SPRING

C=2.6

It is important to use the same body setting (rearward,

center, frontward) both on front and rear body posts

at the same time.

#308307-O or #308307-K

SLP ALU SHOCK ABSORBER - SET (2)

2mm

1mm

#302962

SLP SHOCK TOWER REAR 3.0MM GRAPHITE

SLP SHOCK ABSORBER PARTS

For some very specific racing conditions like

extremely-low traction, these SLP shocks with SLP

Shock Tower are available. Also optional SLP Alu

Progressive Shock System Set for improved traction

is available. Please note that all these part are only

for optional SLP shock absorbers and can not be

combined with ULP shock absorber parts.

#308039

SLP ALU PROGRESSIVE SHOCK SYSTEM - SET (2)

#308029

ULP ALU PROGRESSIVE SHOCK SYSTEM - SET (2)

The progressive shocks improve traction and steering characteristics.

This ULP progressive system directly fits the ULP shocks in the kit.

The information about optional lower shock

tower is at the end of the manual.

Summary of Contents for T4'21

















































Search results

Summary of Contents for T4'21

Reviews:

Related manuals for T4'21

Brands by name

Popular brands

Xray T4'21, Instruction Manual

Search results

Summary of Contents for T4'21

Reviews:

Related manuals for T4'21

Brands by name

Popular brands