28
ALTERNATIVE 2
(WIRE ANTI-ROLL BAR)
HUDY GRAPHITE GREASE #106210
INITIAL SETTING
902308
SH M3x8
2x
6mm THREAD
2.0mm
26mm
DETAIL
4. FRONT SUSPENSION
2mm
(INITIAL SETTING)
REARWARD ARM POSITION
Shim in front of arm
FORWARD ARM POSITION
Shim behind arm.
The position of the front arm directly influences the steering Ackermann (angle of the steering linkages). When the arm is moved to rearward position (shim in
front of the arm), the angle of the steering linkages changes and gives less Ackermann. By decreasing the Ackermann, the car gets more turn-in & increased
steering at corner exit, but less cornering speed. The Ackermann can be changed by the Quick-Saver™ (see page 33).
IMPORTANT!
4mm
2mm
3x6x0.2mm
1mm
COMPOSITE SET OF
BUSHINGS
(INITIAL SETTING)
Use 0mm suspension holders
NOTE
ORIENTATION
Rearward
arm position
DETAIL
Forward arm
position
DETAIL
903406
SFH M4x6
It is extremely important that the arms move freely on the
pivot pins. If they do not, use the #107634 HUDY Arm
Reamer to slightly resize the holes in the arms.
ARM REAMER
962032
SHIM 3x6x0.2
This shim should be used ONLY with the SOFT arm
included in the kit.
When using other optional arms - medium, hard, or
graphite - DO NOT use this shim.
FRONT SUSPENSION UPPER ARMS
MEDIUM
OPTION
HARD
OPTION
GRAPHITE OPTION
SOFT
INCLUDED
DO NOT use 0.2mm shim
USE this shim
DO NOT use 0.2mm shim
DO NOT use 0.2mm shim
