➊
➌
➌
➍
➍
3
3.. Insert the screw #30 9346 into the holes on the chassis.
4
4.. Thread short stands onto the screws.
5
5.. Place the graphite brackets onto the screws as shown.
6
6.. Mount the separate shorter threaded battery
holder onto the screws. Orient the mounts
so the battery will fit in the cutouts.
7
7.. Mount the ball-end battery holder mounts (with battery
straps) onto the screws. Orient the mounts so the battery will
fit in the cutouts.
1
1.. Press out the battery mount straps from the
standard battery holders you use on your car.
2
2.. Press the shorter battery holder mount's ball
end into the plastic hub; it will snap into place.
Once installed, the ball end should pivot freely
in all directions.
➎
➏
➐
➋
309346
SFH M3x12
