background image

RF Energy Exposure Awareness and Control Information and Operational Instructions for 

Occupational Use

 

Notice: this radio is intended for use in occupational/controlled conditions where users have full 
knowledge  of  their  exposure  and  can  exercise  control  over  their  exposure  to  meet  the 
occupational  limits  in  FCC  and  International  standards.  This  radio  device  is  NOT  authorized  for 
general population consumer use.

 

 

Federal Communication Commission (FCC) Regulations

 

When Digital 3W Portable Radio is used as a consequence of employment, the FCC requires users 
to  be  fully  aware  of  and  able  to  control  their  exposure  to  meet  occupational  requirement. 
Exposure  awareness  can  be  facilitated  by  the  use  of  a  product  label  directing  users  to  specific 
user  awareness  information.  Your  Digital  3W  Portable  Radio  has  a  RF  Exposure  Product  Label. 
Also,  your  Digital  3W  Portable  Radio  Radio  user  manual  includes  information  and  operating 
instructions required to control your RF exposure and satisfy compliance requirements.

 

 

Compliance with RF Exposure Standards

 

Your Digital 3W Portable Radio is designed and tested to compliance with a number of national 
and  international  standards  and  guidelines  for  human  exposure  to  radio  frequency 
electromagnetic energy. This radio compliance with the IEEE (FCC) and ICNIRP exposure limits for 
occupational/controlled RF exposure environments at operating duty factors of up to 50% talk – 
50%  listen  and  is  approved  for  occupational  use  only.  In  terms  of  measuring  RF  energy  for 
compliance  with  these  exposure  guidelines,  your  radio  generates  measureable  RF  energy  only 
while it is transmitting (during talking), not when it is receiving (listening) or in standby mode.

 

 

Your  Digital  3W  Portable  Radio  complies  with  the  following  RF  energy  exposure  standards  and 
guidelines:

 

 

United States Federal Communications Commission (FCC), Code of Federal Regulations; 

 

 

Institute of Electrical and Electronic Engineers (IEEE) C95.1

 

 

International Commission on Non

-

lionizing Radiation Protection (ICNIRP)

 

 

RF Exposure Compliance and Control Guidelines and Operating Instructions for Two

-

Way Radio 

Operations

 

To control your exposure and ensure compliance with the occupational/controlled environment 
exposure limits, always adhere to the following procedures;

 

 

DO NOT remove the RF Exposure Label from the device

 

 

User awareness instructions should accompany device when transferred to other users.

 

 

Operational Instructions and Training Guidelines

 

To  ensure  optimal  performance  and  compliance  with  the  occupational/controlled  environment 
RF energy exposure limits in the above standards and guidelines, users should transmit no more 
than 50% of the time and always adhere to the following procedures;

 

 

In front of the face, hold the radio in a vertical position with microphone (and other parts of 
the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or 
lips. Keep the radio at a proper distance is important to ensure compliance.

 

Summary of Contents for DX-100 Series






























Reviews: