Safety Information
1. Read all instructions before using this product
2. Check for missing or damaged parts
3. Do not exceed the vehicle maximum load capacity.
4. Always distribute load evenly. Heavier poles should be on the inner rod holder when set up for dual rods.
5. Always secure load with proper straps.
6. DO NOT exceed 65MPH while poles are mounted, not for extreme off road conditions
7. Follow D.O.T. Guidelines for installation and use.
8. Do not use if you feel your vision is obstructed. Follow all local and federal laws.
9. Be aware of road conditions! Sudden bumps and pot holes can cause an instant dynamic load on the cargo
accessories which may result in damage to the equipment. Driving over a bump can create a brief excess load
on your rack. Always check your load and hitch connections after going over any large bumps or dips in the
road.
10. Check tension on bolts periodically.
11. Know clearance height when rods are installed, Low clearance bridges, garages and trees can cause
damage to rods.
!
!
Failure to comply with these instructions and safety precautions
can result in serious injury or damage to equipment or vehicle
Maintenance and Service
Always inspect rack before use Check for:
Cleaning/Care:
DO NOT use rack or accessories if there is damage or missing parts.
•
Loose or missing hardware
•
Cracked or broken parts
•
Any bent parts
Clean with a mild soap and sponge or rag.
Keep inside of receiver tube clean from debris
Always thoroughly dry before storage.
Weight Rating:
Single Rod Holder has 10lb limit including Add-On Bracket and Rods.
