operating XPression Maps, see the “XPression Maps User Guide” available in the C:\Archive folder.
For information on...
Fill Input 2
Input 2
Fill Input 1
Input 1
Key Output
Output 2
Fill Output
Output 1
Default (2 in 2 out)
HD-BNC
7
Connect the HD-BNC end of the pigtail cables to the HD-BNC connectors and attach the SDI cables to the BNC end of the pigtails
according to their required destination.
The default configuration is displayed in the table at right.
Keep any unused pigtail and SDI cables in a safe place for future use.
If your facility requires analog outputs, additional outboard digital to analog conversion equipment is available from Ross Video.
8
Connect power cords from the AC Ports on the XPression Maps system to the mains power.
XPression Maps system power supplies are auto-sensing and can use either 110 VAC or 220 VAC.
9
On the front of the chassis, press the button on the outer-left side of the door and pull the door outward to remove it from the XPression Maps system.
10
Press the
Power
button ( ) on the front of the XPression Maps system.
Wait for the system to finish booting up.
When shutting down, Ross Video recommends shutting down XPression Maps systems from the Windows operating system.
11
Click the XPression Maps user account icon to log onto the system.
8
1
4
3
2
SDI 4
SDI 3
SDI 2
SDI 1
7
Getting Started continued