3500DR-027-01 ©2021 Ross Video Limited, Ross®, and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been taken in the preparation
of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Technical Support:
1-844-652-0645 (North America)
+800 1005 0100 (International)
Email: [email protected]
Need Help?
1
Use the supplied Rack Mount Kit to mount the XPression Maps system in a 19’’ EIA equipment rack.
For information on installing the XPression Maps chassis in a rack, see the provided document
“Installing the Chassis in a Rack”.
2
Plug the supplied Keyboard into one of the
USB-C
ports using the supplied USB-C to USB-A adapter.
3
Plug the supplied Mouse into one of the
USB-C
ports using the supplied USB-C to USB-A adapter.
4
Connect a Monitor (customer supplied) to any of the three display ports
(
a
)
.
When using display ports, ensure the correct display port to DVI adapters are used (DVI-D or DVI-I).
KVM extenders (customer supplied) are required when the XPression Maps system monitor, keyboard,
and mouse are located remotely from the rack room.
5
Plug an Ethernet cable from your Local Area Network into either the
1G
or
10G
Ethernet
port.
XPression Maps systems can be connected to the Internet or a restricted production network.
The network connection is also used to distribute assets and for the RossTalk/Smart GPI feature.
6
Connect your house reference Genlock signal to the
REF
mini-BNC connector.
XPression Maps systems accept analog blackburst or tri-level sync as reference inputs. Tri-level sync
is recommended for HD installations.
Continued on other side...
1
4
3
2
10G
1G
a
a
a
6
5
4
3
2
When contacting technical support: please
provide the information
listed on the following label,
which is located on the top
right front side of the
chassis.
Ross Video Ltd.
Part #: ###-###-##
Issue: #
Serial #: ########
#/#
CAUTION: Before you set up and operate this product, see the “Important Safety Instructions” in your Manual.
Getting Started