Xpress D2.1, User Manual, Page: 9 / 20

9
Installation
Here’s where you can stick it...and how...
D2.1
Shelf
Wood
Screw Wood
Screw
100-240V-50/60Hz 2.5A
STATUS
RECEIVER
IN
LINE IN
L
R
SUB OUT
OPTICAL IN
L- L+ R- R+
USB
100-240V-50/60Hz 2.5A
STATUS
RECEIVER
IN
LINE IN
L
R
SUB OUT
OPTICAL IN
L- L+ R- R+
USB
SHELF MOUNT
The D2.1 can be conveniently mounted on a shelf top as shown. Use wood screws to secure
the amp to the shelf to avoid having the amp slide off the shelf and possibly damage the amp,
connected cables or other equipment. Leave room for wires. Allow adequate space for airflow.
Do not set objects on top of the amp.
D2.1
Drywall or Plywood
Keyholes
Keyholes
WALL MOUNT
The D2.1 can be wall mounted to the inside of an equipment cabinet or regular wall surface.
A sheet of plywood or particle board attached to wall studs makes a good mounting surface,
otherwise use proper drywall anchors to assure a secure mount. Install wood screws at the
spacing of the mounting bracket keyholes. Slip the amp (connector plate end down) over the
screw heads and then slide the amp down to lock the amp in place. Tighten the screws to
secure the amp to the wall. Leave room for wires. Allow adequate space for airflow. Do not
set objects on top of the amp.