2
IN
RS-
485 (max. 50m)
DINRTT
2 Relay Remote Unit
and request-to-exit Button
MTPADP-BT-EH-SA
Bluetooth standalone keypad with
integrated RFID reader
RTT
1 Relay Remote Unit
and request-to-exit Button
RU2
2 Relay Remote Unit
OR
Secured Area
Unsecured Area
+12V
GND
NO
COM
A
B
NC
PB
RS 485
Power
Supply
GND_PB
RU1
1 Relay Remote Unit
Grey
Red
Black
White
Yellow
Pink
Blue
Violet
+12V
GND
D0
D1
RS-485
Power Supply
Wiegand
Tamper
A
B
to remote relay unit
to wiegand controller
4. WIRING AND PAIRING
Pairing the reader with remote relay unit is done
from the remote relay unit and enables added
security. After being paired, it is not possible to
switch any of the devices, since the reader will work
only with the paired remote relay unit.
The
Bluetooth
reader must be connected to remote
relay unit, unless is used as wiegand reader.
The remote relay units compatible with MTPADB-BT-
EH-SA are RU1, RU2, RTT and DINRTT. Once
connected, the remote relay unit must be paired
with the
Bluetooth
reader.
There are four options to wire and pair the reader. It can be paired to RU2, RU1, DINRTT and RTT.
4.1 Wiring and pairing MTPADP-BT-EH + RU1
+12V
GND
NO
COM
A
B
NC
PB
RS-485
Power
Supply
GND_PB
white
yellow
gray
red
black
blue
orange
violet
pink
Black
Red
Pink
Violet
Reader
Exit Button
Electric
Door Strike
12 VDC
+
-
+
-
max. 50 m
Pairing Reader with RU1 (high security)
- Keep the button pressed
for at least 5 sec. and the
units will be paired.
Other pairing devices:
Device
Description
Relays
RU2
DINRTT
RTT
Flush mount sensitive push button and remote relay
DIN rail mount remote relay unit
Surface mount sensitive push button and remote relay
2
2
1
4.2 Wiring MTPADP-BT-EH-SA to wiegand controller
Grey
Red
Black
White
Yellow
Pink
Blue
Violet
12V
DC(CC)
D0
D1
+
-
Host/ Unité Centrale/ Unita' centrale/
Sistema receptor/ Controller/ Controller
Max 150m
By default, the reader is set to Wiegand 26
bit for both the keypad and the RFID reader.
You can set the reader, using the software,
to Wiegand 24, 26, 32, 34, 56, 58 bits.
You can set the keypad to send 4, 6 or 8
bits per key, while the RFID reader (card)
sends wiegand.