xpr B100-SA, User Manual

Page: 6 / 10

6
www.xprgroup.com
8.0 Q P UICK ROGRAMMING
1.Push dip switch no.2 in position ON.
2.Reset the Power of the device.
3.Wait for One long + mulple short beeps
4.Put the dip switch in position OFF.
(short beeps will stop)
5.Wait for the bo om row LEDs to blink in Orange.
6.Swipe the Master finger . (Unl Ok Beep) min.6 mes
Note: Aer enrolling the Master finger the device will auto-Reset (wait for 7 seconds and the OK beep).
Note: This procedure also deletes all the users and administrators previously enrolled.
<Blinking Blinking>
8.1 Adding Master Finger and delete all users
1. There is 1 Master Finger. The master finger can enroll/delete user and all the other se ngs. The Master finger
can be changed ONLY with the jumper.
2. There are 2 Administrator Fingers. The administrator can do all the things that Master can do. The Master can
delete the Administrator, but the Administrator can not delete the Master.
3. The User can be assigned to one of the 8 available User Groups. With the Quick programming feature, the Users
are assigned in Group 1 or Group 2. For most of the installaons 2 groups are enough and can be used as: Group
1 for permanent residents, Group 2 for guest and visitors.
4. The user can be deleted by swiping its user finger or by deleng the group in which that user is enrolled. Once
the Group of users is deleted, all the users within that group will be deleted.
5. The Groups are not limited by the number of users. (ex. Group 1 can contain 20 users, Group 2 can contain 70
users, but the total number must remain bellow 97...)
x 6
1 2
ON
1 2
ON
No.2
No.2
OK Beep
Entry MODE
Back to MAIN MENU
Scroll down to select:
Finger
Finger OR PIN
Finger AND PIN
Finger OR Card
Finger AND Card
Finger ON Card
BL
BL
BL
BL
BL
BL
By swiping finger select entry mode
11.0 B100-SA P M ROGRAMMING ENU
11.7.1 Entry Mode and Backlight
11.7 Se ngs
15
www.xprgroup.com
Backlight ON/OFF
OK Beep
Reader OFF
Backlight
Back to MAIN MENU
Scroll down to select:
Remote OFF
All ON
All OFF
NOTE:
Swipe UPWARDS
to exit the MENU
Example:
Task: Set the Reader to work in “Finger and Card” mode
Scroll Master Finger 10 mes, tap, scroll twice, tap, scroll 4 mes, tap, swipe UP to exit.
Tap sensor
Tap sensor