www.xprgroup.com
2
Device
Description
Relays
RU2
DIN rail mount remote relay unit
2
DINRTT
Flush mount sensitive push button and remote relay
2
RTT
Surface mount sensitive push button and remote relay
1
RU2
2 Relay Remote Unit
RU1
1 Relay Remote Unit
RTT
1 Relay Remote Unit and
request-to-exit Button
Secured Area
Outside
B100P-BT-EH-SA
Bluetooth biometric reader
with integrated proximity reader
RS-485 (max. 5
0m)
DINRTT
2 Relay Remote Unit and
request-to-exit Button
4. WIRING AND PAIRING
4.1 Wiring and pairing B100P-BT-EH-SA + RU1
4.2 Wiring B100P-BT-EH-SA to Wiegand Controller
There are four options to wire and pair the reader. It can be paired to RU2, RU1, DINRTT and RTT.
Pairing the reader with remote relay unit is done
from the remote relay unit and enables added
security. After being paired, it is not possible to
switch any of the devices, since the reader will work
only with the paired remote relay unit.
The
Bluetooth
reader must be connected to remote
relay unit, unless is used as wiegand reader.
The remote relay units compatible with
MTPADB-BTEH- SA are RU1, RU2, RTT and DINRTT.
Once connected, the remote relay unit must be
paired with the
Bluetooth
reader.
Pairing Reader with RU1 (high security)
- Keep the button pressed
for at least 5 sec. and the
units will be paired.
By default, the reader is set to Wiegand
26 bit.
You can set the reader, using the
software, to Wiegand 24, 26, 32, 34, 56,
58 bits.
Other pairing devices:
