1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the
unit with wet hands or while standing in water.
2. To avoid risk of injury, do not direct air flow at face or body.
3. To reduce the risk of fire or electric shock, do not use the Mini Air Mover with any solid-state speed
control device.
4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and /
or installation of a GFCI receptacle if necessary.
5. Do not operate the Mini Air Mover with a damaged cord or plug. Discard the unit or return it to an
authorized service facility for examination and/or repair.
6. Unplug the Mini Air Mover from the power supply before servicing or cleaning.
7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners,
or similar coverings. Place the power cord away from traffic area to prevent tripping.
8. Do not allow children to play with or around the Mini Air Mover at any time.
9. Do not move or carry the Mini Air Mover while unit is operating.
10. Mini Air Movers in operation must be supervised at all times.
Model
P-200T
P-200AT
P-230AT
Volt / Frequency
115V / 60Hz
115V / 60Hz
115V / 60Hz
Power
1/8 HP
1/8 HP
1/5 HP
Amp
1.5 Amps
1.5 Amps
2.3 Amps
Rated Airflow (On High)
600 CFM
600 CFM
800 CFM
RPM (Low / Medium / High)
1100 / 1250 / 1500
1100 / 1250 / 1500
1000 / 1250 / 1500
Speeds
Three
Three
Three
Built-In Power Outlet / Daisy Chain
No
Yes
Yes
3-Hour Timer
Yes
Yes
Yes
Positions
4 (0°, 20° Kickstand, 45°, 90°)
4 (0°, 20° Kickstand, 45°, 90°)
4 (0°, 20° Kickstand, 45°, 90°)
Unit / Box Weight
8.5 Lbs. / 9.7 Lbs.
8.7 Lbs. / 9.9 Lbs.
9.9 Lbs. / 11.1Lbs.
Unit / Box Size (L x W x H)
10.7”x12.4”x13.3” / 13.6”x12.8”x11” 10.7”x12.4”x13.3” / 13.6”x12.8”x11” 10.7”x12.4”x13.3” / 13.6”x12.8”x11”
Power Cord (Length/Size)
10’/18AWG
10’/14AWG
10’/14AWG
Overheating
Protection
Thermally
Protected
Thermally
Protected
Thermally
Protected
Housing
Injection Mold / Polypropylene (PP) Injection Mold / Polypropylene (PP) Injection Mold / Polypropylene (PP)
Safety
Certificates
ETL / C-ETL
ETL / C-ETL
ETL / C-ETL