- 3 -
A
SETTIN
G
Turn di
a
desired
(1-180
m
“ON” p
o
unit for
G
OPTIONAL TIMER
a
l to select
ti
me
m
inutes)
o
sition sets
continuous use
SPEEDS
READ ALL INSTRUCTIONS BEFORE OPERATING
1.Prior to plugging the unit into the power source,
inspect completely for any shipping damage.
2.Plug the electrical cord into the power outlet
.
3.Carefully place the unit on a stable, flat, dry surface.
4.Position unit to desired angle to direct air flow.
5.Turn switch to desired speed
.
6.To generate negative ions, flip green anion switch
from OFF (O) position to ON (▬).
7.Make sure unit operates normally and air flow vents
are not obstructed.
8.To reduce the risk of injury, close supervision is necessary
when an appliance is used near children. Do not allow
children to play with or around an Air Mover at any time.
FILLING SCENTED CARTRIDGE
1.Remove scent cartridge from the air mover by turning counter-clockwise
while unit is positioned facing you.
2.Flip hinged top open.
3.Open scented bead packet sample that is included with your purchase.
4.Fill cartridge according to the scent intensity desired.
5.Reassemble by screwing cartridge back into the unit clock-wise.
OPERATION
WARNING: KEEP OUT OF REACH OF CHILDREN
** No Timer feature for P-150N