https://www.XPOtool.com
Item 64252
Page 4
The Tool Experts
08 2023-1
Pre-assembling notes
Trolley bed
•
The trolley bed consists of two nested profiles slid one in another, that are made up of five long
profiles. The special cross section of these profiles allows a high payload, even when the trolley
is extended.
•
The useful dimension of the trolley bed contracted is 410 × 420
mm. Extended, it is by 50
%
larger, adopting a size of 625 × 420
mm. The safety bracket prevents the accidental extension
of the trolley after it has been contracted.
Handle unit
•
The handle unit is made of two square tubes and one extendable handle, that can be slid into
these tubes. The handle is covered with contaminant-free foam.
•
A frame consisting of angled profiles blocks or un-blocks the handle, in upright and in extended
position. To un-block the handle or to set it in the horizontal position, this profile frame is pressed
down.
•
Two springs press the frame back to the resting position. In the upright and extended position,
the handle unit/handle clicks into place, what can be heard.
Attaching the castors
Important note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.