https://www.XPOtool.com
Item 63407
Page 5
The Tool Experts
07 2022-1
5.
Press and hold the power button
(19)
to heat up the blade
(2).
The blade takes about 1
min to
reach the pre-set operating temperature and then stays at the selected temperature.
6.
The operating lamp
(22)
lights up during operation.
7.
When the blade
(2)
has reached the pre-set temperature, you can use the sharp edge of the
blade to cut lines or the side of the blade to cut wide grooves.
8.
When you release the power button
(19),
the power to the blade
(2)
will be cut off and the blade
will gradually cool down.
9.
It takes a few minutes for the residual heat from the blade
(2)
to dissipate. Be careful while the
blade is still hot.
Burning hazard!
10.
Disconnect the power plug from the mains.
11.
When the device has completely cooled down, store it in a clean, dry, and safe place out of the
reach of children and other unauthorised persons.
Maintaining and cleaning
•
Properly disconnect the pump from its power supply by removing its plug from the socket before
performing any kind of maintenance work.
•
To ensure safe and efficient operation, always keep the device and its ventilation slots clean.
•
If, despite all the care taken during manufacture and testing, the device fails, repair must be
carried out by an authorised power-tools repair service.
Heat levels
Level
Temperature
(
℃
)
1
100
2
160
3
230
4
360
5
450
