https://www.XPOtool.com
Item 63369
Page 5
The Tool Experts
09 2022-1
Assembly
Step
1 – assembly of inlet elbow
1.
First, fix the gauge
(15)
to the upper inlet elbow by turning it so that it can be seen emerging
above the surface of the tank.
2.
Then fix the butterfly valve
(18A)
to the floor of the elbow.
3.
Fix the fitting connection
(20)
to the butterfly valve.
4.
Fix the connection tube
(13)
to the elbow.
Step
2 – assembly of water separator filter
1.
On either side of the filter, two fitting connections
(16)
are screwed in. Fix the air valve
(18)
to
the fitting connection
(16)
on one side.
2.
Then fix the connector
(19)
on the other side of the air valve.
3.
If you are ready to put the sandblaster into operation, the air hose of your compressor is fixed
to the connector
(19).
A
