https://www.XPOtool.com
Item 63323
Page 4
The Tool Experts
07 2022-1
Step
1
Drill out the damaged thread with a correctly
sized drill (included).
Step
2
Finish the pre-drilled hole with the thread drill in-
cluded.
Step
3
Set the spiral inset into the applicator.
Step
4
Screw in the spiral into the cast piece.
Step
5
Use the breaking tool to break off the pin of the
spiral inset.
Step
6
The thread is repaired and ready for use.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.