https://www.XPOtool.com
Item 63258
Page 3
The Tool Experts
05 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
Caution!
Failure to observe these instructions may result in personal injury and/or damage to property.
•
Only install the device according to the instructions in this manual. Any improper installation
may result in hazards.
•
Wear appropriate protective equipment such as safety goggles, work shoes, and protective
gloves.
•
Keep the work area clean and well lit. Untidy and poorly lit areas increase the risk of accidents.
•
Keep bystanders away from your work area.
•
Never assemble or use the stand under the influence of alcohol, drugs, or medicine.
•
Data on weight capacity and other product characteristics apply only to products properly and
completely assembled.
•
The maximum load capacity of 454
kg must not be exceeded.
•
Only use the stand on hard and level surfaces.
•
Secure the wheel with a chock and strap the motorcycle before transport.
•
Keep your distance from the stand/chock and the bike when loading and unloading.
•
Load and unload the bike slowly.
•
The stand is only suitable for motorcycle tyres. Do not use it for aircraft.
•
Adjust the tyre size before use.
•
If available, also use the kickstand.
•
Do not ride the motorcycle onto the stand.
•
Do not sit on the motorcycle when it is loaded on the stand.
•
Check the stand before each use. Do not use it if any parts are loose or damaged.
•
The warnings, precautions, and instructions in this manual cannot cover all possible conditions
and situations that may occur. Therefore, always work with foresight and caution.