background image

 

https://www.XPOtool.com 

 

Item 63037, 63038

 

Page 2

 

The Tool Experts

 

 

  

 

01 2022

-1

 

 

The information contained in this document may alter at any time without previous notice. It is prohibited 
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.

 

The  WilTec  Wildanger  Technik  GmbH  cannot  be  held  accountable  for  any  possible  mistakes  in  this 
operating manual, nor in the diagrams and figures shown.

 

Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure 
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.

 

If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing 
from you.

 

 

Send an e-mail to:

 

 

[email protected]

 

 

or use our contact form:

 

 

https://www.wiltec.de/contacts/

 

 

The most recent version of this manual in various languages can be found in our online shop via:

 

 

https://www.wiltec.de/docsearch

 

 
 

Our postal address is:

 

 

WilTec Wildanger Technik GmbH

 

Königsbenden 12

 

52249 Eschweiler

 

Germany

 

 

Do you wish to pick goods up? Our pick-up address is:

 

 

WilTec Wildanger Technik GmbH

 

Königsbenden 28

 

52249 Eschweiler

 

Germany

 

 

To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or 
placing your order via the webshop.

 

 

E-mail: [email protected]

 

Tel: +49 2403 55592-0

 

Fax: +49 2403 55592-15

 

 

To return orders for exchange, repair, or other purposes, please use the following address. Attention! 
To  allow  for  a  smooth  execution  of  your  complaint  or  return,  it  is  important  to  contact  our  customer 
service team before returning the goods.

 

 

Returns Department

 

WilTec Wildanger Technik GmbH

 

Königsbenden 28

 

52249 Eschweiler

 

 

E-mail: 

[email protected]

 

Tel: +49 2403 55592-0

 

Fax: +49 2403 55592-15

 

 

 

Summary of Contents for 63037











Reviews: