Adjustment after wear
To maintain the recommended working depth, use the working depth adjustment lever (Fig. 1, 7). To
adjust the lever, first pull it out upwards and then select the desired working depth. Pos. 1 is for trans-
porting the machine.
Note!
The blades and springs of this machine wear out depending on the type of use. The more in-
tensively the machine is used, the greater the wear on the blades and springs are.
Hard or very dry soils accelerate the wear process as does excessive use. In case the wear of the
blades worsens the working results of the machine, it is possible to adjust the scarifying cylinders so
that the working depth is kept constant at the depth described above.
Commissioning (Fig. 11)
Before restarting, check that the blade has come to a complete stop. Do not switch the machine on
and off in rapid succession.
Starting
1. Press and hold the safety button
(1).
Pull the start lever
(2)
to the handle.
2. Unlock the safety button.
Switching off
Release the start lever
(2).
Maintaining and cleaning the machine
Attention! Danger!
Rotating blades can cause injuries.
Before carrying out maintenance work, always disconnect the machine from the mains and
wait until the cylinder has come to a complete standstill.
Wear work gloves when carrying out maintenance work. The machine should be cleaned
after each use.
Risk of injury and damage to property.
Do not clean the machine under running water (especially not by high pressure).
Do not use hard or pointed objects to clean the machine.
Remove grass and accumulated debris from the wheels, the scarifying cylinder and the cover.
https://www.XPOtool.com
Article 63013
Page 9
The Tool Experts
04 2021
-1
