© by WilTec Wildanger Technik GmbH
Item 62669
Page 3
12 2021
-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
General safety instructions
CAUTION:
When using the device, observe basic safety instructions to reduce the risk of injury
and to avoid damage to the device.
•
Read all instructions carefully before using the tool!
•
This device is not intended to be used by persons (including children) with limited physical,
sensory, or mental capabilities or lack of experience and/or knowledge, unless they are super-
vised or instructed by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the device. Cleaning and
maintenance must not be carried out by children.
Safety of work area
•
Keep work area clean and well-lit.
•
Observe the conditions of your working area. Do not use machines or electric tools in damp or
wet areas. Do not expose them to rain. Do not use electrically powered tools in the presence of
flammable gases or liquids.
•
Keep children away. Children are not allowed to enter work areas. They must not touch any
machines, tools, or electrical cables.
•
Store unused tools and accessories safely. When not in use, store tools in a dry place to prevent
rust. Lock tools away and keep them out of children’s reach.
•
Use the right tools for the job. Do not use tools that are too small for work that requires a large
industrial tool. There are specific purposes for which the tool is designed. It does its job better
and safer when it is only used for these designated jobs. Do not modify the tool and do not use
it for purposes for which it was not intended.
Safety of persons
•
Wear suitable clothing. Do not wear loose clothing or jewellery, as these can be caught by
machines. It is recommended to wear protective, electrically non-conductive clothing and non-
slip shoes or safety shoes while working. Wear hair protection if you have long hair.
•
Wear safety glasses and use ear protection.
•
Do not lean too far forward. Make sure to have a safe stand and do not reach out over running
machines.
Safety of handling tools and machines
•
Maintain tools carefully. Check cables and hoses regularly, replace them if damaged or have
them repaired by a qualified technician. Always keep handles clean, dry, and free of grease and
oil.
