XPOtool 61054, Operation Manual, Page: 7 / 11

© by WilTec Wildanger Technik GmbH Item 61054 Page 7
http://www.WilTec.de
http://www.aoyue.eu 04 2022 -1
http://www.teichtip.de
Installation
Before repair or replacement of electric tool parts or accessories, be sure to pull out the plug from
the socket.
Sandpaper selection
According to the material and the grinding effect, select the appropriate sandpaper:
Material Use Grit
Pigment Removal of pigments 40
Paint Removal of remaining paint 60
Filling agent Grinding bottom pigment (such as finishing
bottom) 80
Interstitial material Brush paint, grinding residues
Drop-shaped or convex pigment residues
Flat bottom material for painting
100
120
180
Replacing sanding paper
Before installing the new sanding paper, you first need to clear dirt sticking to the grinding wheel by use
of a brush. The grinding surface adhesive disc has a layer of cloth so it can quickly and easily be in-
stalled. The surface grinding sandpaper is pressed into the adhesive disc.
Do not use the sander without a proper abrasive pad installed to prevent severe damage to the work.
Replacing the rigid disc
The output shaft is inserted into the adhesive disc centre with a six-angle wrench in a clockwise rotation.
The hands holding the adhesive grinding disc, the grinding disc can be removed from the adhesive.