https://www.XPOtool.com
Item 61000–61002, 61769
Page 5
The Tool Experts
04 2022
-1
•
Remove adjusting keys and wrenches.
Be sure that keys and wrenches are removed from
the tool or machine work surface before operation.
•
Avoid unintentional starting.
Be sure to be prepared to begin work before switching the device
on.
•
Stay alert.
Fully concentrate on what you are doing. Do not use the device when being tired or
under the influence of alcohol, drugs, or medicine.
•
Before operating the device, check it for damaged parts.
Before using any tool, any part
appearing damaged should be carefully checked to determine if it will operate properly and
perform its intended function. Check for alignment and binding of moving parts, any broken parts
or mounting fixtures, and any other condition that may affect proper operation. Make sure that
no damaged or broken parts stay inside the device. Any damaged part should be properly re-
paired or replaced by a qualified technician. Do not use the tool if any switch does not turn it on
and off properly.
•
Spare parts and accessories.
When servicing the device, make sure that service personnel
only use identical replacement parts. Use of any other parts will void the warranty. Only use
parts and accessories intended for use with this tool.
Special warnings when using this electric device
Using this powerful device might lead to particular dangers. Take care to protect yourself and
those around you.
Steel cable
•
Be sure that the cable is in good condition and attached properly.
•
Do not use the winch if the cable is frayed.
•
Do not replace the cable with a cable of lesser strength.
Battery
•
Ensure that the battery is in good condition.
•
Avoid contact with battery acid or other contaminants.
•
Always wear approved eye protection when working on a battery.
•
Have the engine running when using the winch to avoid running the battery down.
Stand back
•
Stay out of the direct line of direction that the cable is pulling, as it is whiplashed along this line
when slipping or breaking. While using the device, keep your hands, clothes, hair, and jewellery
away from the winch.
•
Call a spotter in to ensure safe use of the winch. Make sure that this person is out of the way of
the vehicle and cable before switching on the winch.
Power limits
•
Do not try to exceed the pulling limits of this winch.
•
Never use the hand crank to “assist” the winch. This would cause damages to the winch and
might lead to injuries.
Installation
Wiring the electric winch
This winch can be used with temporary or permanent wiring.
Temporary wiring:
1.
Lift the rubber seal of the socket at the right side of the winch housing and plug the cable in.
Lay the cable from the winch to battery making sure that it cannot be tangled in portable equip-
ment and cause a tripping hazard.
2.
Connect the black clamp handle of the power cable with the frame of the vehicle, establishing
an earth connection. Connect the red clamp handle to the positive (+/red) terminal of the battery.
Note:
Make sure to use a 12
V car battery or equivalent in good condition.
