https://www.XPOtool.com
Item 34138
Page 3
The Tool Experts
04 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•
Familiarise yourself with the user’s manual before using the device. Read it thoroughly and
follow all safety and other instructions to avoid damages and injuries.
•
Only use the device for its specified purpose. Any incorrect use might lead to injuries and/or
damages.
•
This device is not suitable for persons (including children) with limited physical, sensory, or
mental abilities, lack of experience or knowledge, unless they have been instructed and are
supervised by an experience person responsible for their safety and familiar with the device.
•
Children must not use the device and should be supervised when they are near it to ensure that
they do not play with it.
•
Under no circumstances should you direct the device towards your body or other persons’ bod-
ies or animals.
•
The maximum capacity must never be exceeded.
•
Before any use, check all connections and hoses for proper condition.
•
Should the device or hose be damaged, the device must not be used.
Risk of injuries!
•
Only operate the device in well-ventilated areas.
•
Wear appropriate protective equipment (safety glasses, protective gloves, respiratory mask)
when operating the device.
•
Do not use the device near possible sources of ignition (e.g., cigarettes, open flames, etc.).
Paints, thinners, and dissolvents, being highly flammable, must be handled with uttermost care.
Obey the warnings and safety instructions given by the manufacturer of the paint, thinner, or
dissolvent.
•
Clean the device after every use.
•
Only have the device repaired by a qualified person.
Before using the product
•
Make sure to have received all components of the device and all accessory parts and check
them for damages immediately after unpacking them.
•
To achieve a regular and clean spray pattern, the surfaces to work on must be clean, dry, free
from dust, and free from rust.
Switch on air
•
Adjust the desired air pressure (1–3.4
bar) on the pressure regulator (or bleeder valve).
•
The normal operation pressure is 2.5
bar.
Use
1.
Connect the pressure regulator to the air hose.
2.
Connect the air hose to the air connection of the gun. Make sure that the air pressure suits the
material to be worked on. The bleeder valve included is intended for connecting an air duster.
Nevertheless, for financial reasons, it is advisable to use a mini-compressor.
3.
Thin the paint in accordance with the manufacturer’s instructions and fill the paint into the paint
cup. Then close the paint cup properly.
4.
Take the gun. Make sure that the compressed-air hoses are not kinked or otherwise blocked.
