https://www.XPOtool.com
Item 30108
Page 3
The Tool Experts
07 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Always wear protective gloves!
Warning!
Danger of injuries and damages if used improperly!
•
Always respect and abide the safety instructions.
•
Keep persons not involved in loading well away from the loading ramp.
•
Avoid working alone. When working in pairs or with more persons, you will be able to assist one
another if anything unforeseen happens.
•
Always make sure that the working zone is sufficiently lit.
•
Wear suitable clothing. Do not wear loose clothing or jewellery. They could get caught by moving
parts. Wear non-conductive clothes, solid non-skid shoes, and work gloves.
•
Protect long hair under a hairnet or tie it safely together.
•
Wear protective goggles and hearing protection.
•
Make for a secure footing to be able to keep your balance.
•
Only use the device as described in the manual; otherwise, damages might occur and warranty
might expire. Never exceed the max. admissible capacity.
•
Always be careful. Do not use the device when being tired or under the influence of alcohol,
drugs, or medicine.
•
Before operating the device, check it for damages. Have all damaged components replaced by
an expert.
•
Only use original spare parts. When using non-original spare parts, warranty will expire. Only
use spare parts suitable for the device.
•
All maintenance work must be done by an expert.
•
Only use the device on a flat, level, and solid surface. Make sure that the end with the
hooks/latch(es) rests completely on the rear flap or loading space of the vehicle.
•
Make sure that the ramp is free of dirt, grease, and oil.
Slip danger!
•
After unpacking, check for completeness of components.
Use
•
Keep animals and people away from the ramp and loading space.
•
Never load a vehicle with the engine running. To be absolutely sure, wait for the engine to cool
down before loading.
•
Never exceed the max. admissible weight rated. Load slowly. Do not drop anything onto the
ramp. Dropping a load onto the ramp might reduce the capacity and lead to damages and/or
injuries. Only use the device on a hard, level, solid surface.
Loading a motorcycle
•
This work should be done by 3
individuals.
•
Make sure that the ramp is free of dirt, grease, and oil.
Slip danger!
