https://www.XPOtool.com
Item 62795
Page 3
The Tool Experts
06 2021
-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manu-
al carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
This pneumatic lubrication pump/professional grease pump is driven by compressed air and shoots
grease at high pressure. This product convinces with its reliability, its low compressed air consump-
tion, the pleasant and easy handling as well as the constant working pressure. It allows you to extend
the service life of friction parts of heavy machinery, and that is why it finds application in the automo-
tive industry and other industries.
Safety instructions
•
Before using the pump, thoroughly read the operating instructions and all safety instructions
and follow them. Failure to obey the information and instructions contained in this manual
might lead to property damage and personal injury.
•
Observe the warnings and information attached to the device.
•
Keep bystanders and children away from your work area.
•
Make sure that your work area is well-lit and tidy. A cluttered and poorly lit workplace increas-
es the risk of accidents.
•
Wear appropriate protective equipment while working, e.g., work gloves, non-slip work shoes,
protective goggles, and a breathing apparatus.
•
Do not use the device if you are under the influence of alcohol, drugs, or medicine that impair
consciousness.
•
Do not make any modifications to the device and only use it for its intended purpose. Improper
use or modification might lead to property damage and personal injury.
•
Caution!
Danger of slipping due to lubricants. Immediately remove spilled or leaked lub-
ricant and dispose of it properly.
•
Leaking lubricant can cause environmental damages! Therefore, strictly observe the prescrip-
tions of the water right, clean water law, and environmental law at all times (depending on
your country). If you have doubts concerning these prescriptions, read up on the legal regula-
tions.
Technical specifications
Pressure ratio (without friction losses)
60:1
Pneumatic cylinder diameter
(
㎜
)
70
Capacity of the grease pump
(
ℓ
⁄
min
)
0
–0.85
Delivery pression
(
ℓ
⁄
min
)
300
–480
Pressure range
(
㍴
)
5
–8
Diameter of measured value display
(
㎜
)
35
Capacity
(
ℓ
⁄
h
)
15
