Xplova X2 Quick Start Guide
EN-2
EN
Installing your X2
Please follow the steps below to mount your X2 on
the bike:
1. Hold the bike mount on top of the rubber pad evenly
together ensuring they are aligned squarely to
each other. Then place them on the bike handlebar.
2. Loop an elastic band from
one tab of the bike mount.
Stretch the free end of the
elastic band underneath
the bike handlebar and up
to the other tab. Ensure
the bike mount stays in
place securely.
3. Align the latch on the back of X2 with the bike
mount notch. Press downward slightly and turn X2
until it locks in place.
Charging your X2
1. Please use a standard Micro-USB charger with a
5V charging port. The battery will be fully charged
within 2 hours.
2. Please pull out the weather cap from the Micro-
USB port with care to prevent breakage or
deformation. Any damage to the weather cap may
reduce its ability to resist dust and moisture.