2
7
Page 1: ...ce quotations and site surveys Service and maintenance contracts to suit all requirements Please ask for details By telephone on Techline 44 0 8709 000430 By fax on Techfax 44 0 8709 000530 At the address below Guarantee Contact your local distributor or Xpelair direct for details Technical Advice and Service Contact your local Xpelair distributor Do s and dont s Guarantee Technical advice and ser...
Page 2: ...2 7 ...
Page 3: ... models are permanently connected to the supply and operation is controlled by a remote switch They should be directly wired to the supply through an approved 10A wall mounted surface switch with at least 3mm clearance between contacts 5 Preparing the hole If working above ground floor level appropriate safety precautions must be observed WARNING EYE PROTECTION MUST BE WORN DURING ALL DRILLING OPE...
Page 4: ...eturn Spring and re position into short slot 6 Refit the Backdraught Shutter and Inner Grille Maintenance NOTE A QUALIFIED ELECTRICIAN MUST CARRY OUT ALL CLEANING 1 Before cleaning isolate the fan completely from the mains supply Allow 3 minutes for the impeller to stop and the powered shutter to close 2 Remove the inner grille and back draught shutter see section 6 WARNING Fan will still operate ...
