background image

Excess moisture will travel throughout your home, in the same way that cooking smells waft to every room in 

the house. For this reason, the dehumidifier should be positioned, so that it can draw this moist air towards it 

from all over the home.  Alternatively, if you have a serious problem in one area you can begin by positioning the 

dehumidifier close to this area and later moving it to a more central point.

When positioning the dehumidifier, ensure that it is placed on a level surface and that there is a minimum of 

50cm (20”) of space on either side of the unit to allow for efficient airflow.  

This dehumidifier is fitted with castors for extra mobility, if you move the unit, it should first be switched off and 

the water tank emptied. We do not recommend the use of an extension lead, so please try to ensure that the unit 

is sufficiently close to a fixed mains socket.

When the dehumidifier is in operation, outside doors and windows should be closed for most effective and efficient 

operation.

Parts

Anti dust filter

Air inlet

Water tank

Air outlet

Carry handles

Castors

Continuous drainage 

outlet

Anti-Dust

Filter

Air Inlet

Where To Position

9

Summary of Contents for 5011139071125

















Reviews: