XP Metal Detectors DEUS, User Manual

Page: 40 / 64

AUDIO
OVERLOAD
Press
Scroll with and select
Press
Dēus enables you to adjust the strength of the emitted electromagnetic
field according to three levels (from 1 to 3).
It is adjusted using
Press x 2 to return to the main menu.
By default the power is set to level 2, which offers a very dependable
performance level that is largely sufficient in most cases.
The power only has a subtle effect on the device’s pure performance with
regard to sensitivity. However, it increases your detector’s power consumption
as well as alter its stability on difficult ground.
On iron-infested, mineralised ground, there is no need to use a high power
setting, level 1 will be sufficient as in any case it is impossible to detect
deeply in this kind of ground.
It is therefore better to limit the saturation caused by iron and the ground
by lowering the setting. In this way you will improve analysis and will
ultimately find as many, if not more, targets since you will be better able
to hear them.
Power is set to maximum for the 4 kHz frequency. You do not
therefore have access to the Expert menu when you are on this
frequency.
MENU
EXPERT
SENS
TX POWER
MENU
EXPERT
DISC.
FREQ.
IRON VOL.
SENS
38
Press
Scroll through the menu to reach the
AUDIO RESPONSE
EXPERT
Press
Adjust
AUDIO OVERLOAD with
Press x2 to exit.
Allow the user to choose an overload sound when a target is close
to the coil.
AUDIO OVERLOAD