XP Metal Detectors Deus V4, User Manual

Page: 21 / 52

When first purchased, the Dēus is only configured to operate with its original coil.
If you have one or more optional coils which have already been paired (see
below), you can select which one you want to use from the menu list.
Press
Choose with then press
Switch on the headphones close to the remote control.
On the remote control, press to scroll through the list of available
coils and stop on the one you wish to activate. This coil automatically becomes
active within 4 seconds, while the previous coil reverts to standby mode.
Press X2 to return to the main menu.
If you switch on the headphones after changing the coil via the remote
control, the headphones will not automatically register this change. You will
therefore need to change the coil manually via the headphones. (pg 25)
19
Choose the program to delete in main menu with
Press then select .
Select and press , the program is deleted.
Press
Choose with then press
OPTION
PROGRAMS
PROGRAMS
SELECT
OPTION
CONFIGURATION
COILS
PINPOINTERS
PROGRAMS
SELECT
Choose stop on the program you wish to modify then press
Replace "name program" press
Scroll through the characters
And to advance to the next data entry zone. Or to delete the
previous character. Press
Modify the name of a program (11 to 18)
Delete a modified program (11 to 18)
VALID
PROGRAMS
DELETE
EDIT NAME
SAVE
SELECT
PROGRAMS
EDIT NAME
SAVE
DELETE
SELECT
Choose . Press on
Select an unused slot (11-,...) with then press
Edit the name and press , your program is saved
Save a modified program (11 to18)
SELECT
SELECT
PROGRAMS
EDIT NAME
SAVE
SELECT
SAVE
SELECT
VALID
SAVE
YES
YES
OPTION
DELETE
OPTION
REMOTE CONTROL'S PROGRAMS
From 10 programs factory (P1 to P10) , you can modify them and create
8 additional user programs. (P11 to P18).
2
OPTION
2
COILS
SELECT
OPTION
PROGRAMS
CONFIGURATION
COILS
SELECT
Example
COILS
SELECT
01 043AB7
02 ---------