26
Choose the coil to delete then
. Delete all digits with
then add 6 zeros “000000”. Press
and
confirm with
.
PAIRING
UNPAIR
Delete a coil from the list
OPTION/PAIRING
coil/wireless headphones/pinpointer
Pairing XP wireless headphones
Delete XP wireless headphones
It is impossible to pair a second set of headphones if there is one already paired. In this case, simply
delete the original set of headphones from the WS6 beforehand.
Press
OPTION
>
PAIRING
, with
or
Choose the headphone then press
and
switch on the headphones by holding the
key down for 8 s.
Press >
PAIRING
, with
or choose the headphone, then >
UNPAIR
>
>
.
Choose the coil already paired from the list and press
to use it or pair a new coil.
Press choose
PAIRING
with then the coil logo with or ;
press (3 seconds).
Automatic Pairing (recommended) :
• • Go to the empty slot (-------) with
and press
(3 seconds).
• Put the coil on charge using the clamp.
• The serial number will be displayed on the screen and the new coil is switched ON.
Manual Pairing:
• Go to the empty slot (-------), press
(3 seconds).
• With
and
choose the digit and press
to move on.
• After you have entered the sixth digit press
.
The WS6 now adds this new coil to its list; the new coil is switched ON and flashes every
second and the previous coil is switched OFF and flashes every 4 seconds.
PAIRING
COIL
04 - 20BD11
05 - - - - - - -
03 - 21CD07
02 - 21DF16
Choose the accessory (coil, wireless headphones, MI-6) using
or
, then press
.
Pairing
New coil pairing