OPTIONAL TIE ROD INSTALLATION AND REMOVAL
Optional -1 and +1 Degree Steering Tie Rods are included with the car kit. Please note this is
an advanced adjustment and requires taking apart and reassembling the car. If you do not feel
comfortable performing this task, please do not attempt.
1. Power off both transmitter and car.
2. Remove body.
3. Remove screws indicated in drawings above.
4. Carefully remove components.
5. Select and install optional steering tie rod.
6. Reverse the order for installation.
CARE AND MAINTENANCE
• After each run, examine all parts for damage. If any is found, do not operate until the damage
has been repaired.
• Use a clean cloth to wipe the transmitter and car clean.
• Keep the car, transmitter, and battery away from direct sunlight and/or heat sources.
• For long term storage, we recommend removing the transmitter batteries to avoid unwanted
corrosion.
REPLACEMENT AND OPTION PARTS
For a complete list of replacement and option parts, visit www.xotikmodel.com.
WARRANTY AND PRODUCT SUPPORT
Do not return your product to the place of purchase. XOTIK will repair or replace factory defects
for 30 days from the date of purchase. This warranty specifically does not cover crash dam-
age, misuse, or abuse. To make a warranty claim, please contact our product support team at
[email protected]. This warranty applies only if the product is operated in compliance with
the instructions and warnings provided with this model. XOTIK assumes no liability except for
the exclusive remedy or repair of parts as specified above. XOTIK shall not be liable for conse-
quential or incidental damages.
XOTIK
XOTIK
No.7 The Keer Road, Dongchong Town, Nansha, Guangzhou 511475,
Guangdong, China
Tel: 86-20-3491-2638 Fax: 86-20-3491-2678
Email: [email protected]
Remove screws
©2020 XOTIK ALL RIGHTS RESERVED. MADE IN GUANGZHOU, GUANGDONG, CHINA
XOTIK XC324 Manual V1
XOTIK XC324 Manual V1
8
